tools

Altenew March 2023 Stampwheel Release Blog Hop + Giveaway

SkyPaperScissors

Hello and welcome! Today we’re celebrating the Altenew Stampwheel Release! If you arrived from visiting Therese Calvird, you’re right on track. If you’d like to start from the top, please visit the Altenew Blog. Check the bottom of this post for giveaway information and the full blog hop list.

As soon as I saw the Stampwheel, I knew it was going to replace my current system for stamping layered florals using multiple stamping platforms. I learned early in my stamping days that there’s a pretty good chance I’ll mess up my layered stamped image on the very last layer. I’ll either pick a funky color, or I’ll do a bad job of lining up the final layer, or I’ll smudge the ink; you get the idea. To save myself the frustrating of having to line up the layers all over again, I started using multiple stamp positioning tools, putting one layer in each tool and stamping in assembly line fashion. This also made it easy to mass produce.

With the new Stampwheel, though, instead of using four or more stamp positioning tools, I can use just one!

For my stamping, I used images from the Beautiful Day and Build-A-Flower Wild Rose stamp sets.

I started off by placing a piece of white cardstock into the corner of the stage (the stage is the base). Within the stage is a large clear sticky mat. This mat is unlike other sticky mats; it’s like a giant clear stamp! The sticky mat does a fantastic job of holding the cardstock in place. No magnets needed!

Then I positioned the outline layers of each bloom over the cardstock and put the flip plate (that’s the clear round plate) into place to pick up the stamps. I flipped the plate over, inked up the stamps, and then replaced the flip plate into the stage to stamp.

Next, I removed the flip plate, cleaned the stamps but left them in place, and positioned the next layer of each bloom over the stamped outline. I repositioned the flip plate, this time picking up the second layer stamps with the opposite side of the plate. Then I inked the stamps, stamped down, and repeated twice more, each time rotating the flip plate to pick up the stamps with a free part of the flip plate. Since I only stamped four layers, I just rotated the flip plate 90 degrees, flipped, and rotated again. But I were stamping more layers, I could easily have rotated fewer degrees and accommodated many more layers on a single plate!

By the time I got to the fourth layer, my flip plate looked like this:

Now that all four layers of the blooms were set up on the flip plate, I was able to easily stamp more flowers and change up the colors as I went!

I really hope you’ll enjoy finding fun ways to use this versatile new Altenew Stampwheel tool!

Thank you so much for visiting! Your next stop is the wonderful Svitlana Shayevich!

You are invited to the Inlinkz link party!

Click here to enter
https://fresh.inlinkz.com/js/widget/load.js?id=c0efdbe6b4add43dd7ef

Giveaway

$300 in total prizes! To celebrate this release, Altenew is giving away a $100 gift certificate to 1 lucky winner and a $20 gift certificate to 10 winners! Please leave a comment on the Altenew Card Blog and/or each designer’s blog post on the blog hop list below by 4/05/2023 for a chance to win. Altenew will draw 11 random winners from the comments left on each stop of this blog hop and announce the winners on the Altenew Winners Page on 4/07/2023.

*The winner of the $100 gift certificate will be chosen from comments left on the Altenew blog. 

67 thoughts on “Altenew March 2023 Stampwheel Release Blog Hop + Giveaway”

  5. Seeka, those of us who love layered stamping have been searching for a foolproof way of stamping those layers! Isn’t it wonderful that Altenew discovered one?
    I’m looking forward to many, many layered floral cards from you! x
    =]

    Liked by 1 person

    Reply

  15. The amount of different techniques and different tools incorporated into this one tool is awesome and the more I see the more I want it lol thank you for demonstrating

    Liked by 1 person

    Reply

  16. Since I usually produce multiples of my cards, your photos and description of how easily you were able to do this with the Stampwheel!
    Thank you!!!

    Liked by 1 person

    Reply

  28. I often have difficulty positioning layering stamps in my Misti and the Stampwheel looks like it might eliminate that frustration! I’ve decided I “need” one!

    Liked by 1 person

    Reply

  32. Hi Seeka. Thank you for explaining how this wheel works. I’m so used to a stamping platform it will take some time to get used to. Your flowers turned out beautifully♥

    Liked by 1 person

    Reply

  42. I love the idea of only using one tool ( with all layers) lined up instead of using multiple stamping tools. The sticky mat is a game changer, no more shifting of paper, especially when using magnets to hold it down.

    Liked by 1 person

    Reply

  48. I love my Misti but I only have the one, so you have to stamp several white papers for one layer, remove and reload stamps for the 2nd layer, etc. If you want to go back and stamp more you need to start over again. The more I see the stamp wheel being used with these larger layering stamps, the more I’m think I may need to get myself one!

    Liked by 1 person

    Reply

Leave a reply to Sandra Baggarly Cancel reply